Shop NextGen

Headlight Restoration Clear Coat

Unlike most clear coats, NextGen headlight restoration clear coat has filling properties. It fills in the sanding scratches as it cures, so you don't need to sand past 600 grit. Just sand to 600, wipe the lens with alcohol and spray.

  • Stop at 600 grit. No need to sand any finer.
  • No power tools. No buffer, no drill, no polishing compound.
  • No 10-step sanding. Sand, clean, spray.
  • As little as 30 minutes for a headlight restoration job.

Doing your own car? Start with the single kit. Running a shop? Choose complete kit packs with sanding supplies in every box, or cans-only refills if you already have your prep process dialed in.

Products 7
Built for Clear lenses
Support NextGen
NextGen Headlight Restoration Kit
Showing 7 Products

Why you can stop at 600 grit

Most clear coats need a near-perfect surface underneath, so the usual routine is to keep sanding through finer and finer grits and then machine-polish before you coat. NextGen works differently. It has filling properties: it fills in the fine 600-grit sanding scratches as it cures and levels out clear.

So the sanding ends at 600 grit. That takes the power tools, the polishing compounds and the 10-step sanding processes out of the job, and it's why a headlight restoration can take as little as 30 minutes. It's what NextGen was built on.

Choosing the right NextGen clear coat

Every option uses the same NextGen UV headlight clear coat. The difference is how many vehicles you're doing and what comes in the box.

  • Single kit, for your own car. A boxed kit with a can of clear coat plus the sanding and prep supplies that go with it. $64.95.
  • Complete kit packs (4, 8 or 12), for shops, detailers and resellers. Each kit is individually boxed with clear coat and sanding supplies, so every job starts with the same setup. That works out to $34.99, $31.24 or $28.33 per kit.
  • Cans-only refills (4, 8 or 12), for pros with their own supplies. Clear coat cans only, with no kit boxes or sandpaper: $32.50, $29.99 or $27.50 per can. Pair them with our wet/dry headlight sandpaper.

Why the clear coat step matters

Headlight lenses are polycarbonate with a factory UV coating on the outside. When that coating breaks down, the lens turns yellow and hazy. Sanding removes the damaged layer and whatever is left of the old coating, down to bare lens, which looks evenly milky when it's done right. The clear coat goes on next: it brings back the clarity and puts a UV-protective layer back on the lens.

How it goes on

  1. Sand to 600. Wet-sand the lens until the whole surface is an even, milky white, with no yellow or darker spots of old coating left. Badly oxidized or textured lenses may need a coarser start; our guide shows when. Either way, you finish at 600 grit.
  2. Dry and clean. Dry the lens completely, including the seams where water hides, then wipe it down with alcohol prep pads.
  3. Spray. Mask around the headlight and apply an even coat, following the contour of the lens.

For grit choice, spray technique and working in humidity, follow our step-by-step guide to applying headlight clear coat.

Buying for a shop?

Detailers, dealerships and auto shops can apply for a wholesale account. If you're building a headlight restoration business, Headlight Restoration Academy teaches the full process.

Headlight clear coat questions

What is headlight restoration clear coat?

It's a clear protective coating you spray onto a headlight lens after sanding. It replaces the factory UV coating that broke down and turned yellow, and it gives the sanded lens its clarity back. NextGen is a UV clear coat in an aerosol can.

Why don't I need to sand past 600 grit?

Because NextGen has filling properties. Unlike most clear coats, it fills in the fine 600-grit sanding scratches as it cures, so there's no need to keep sanding with finer grits or polish the lens before you spray. Sand to 600, clean the lens and spray.

Do I need a polisher, compound or power tools?

No. Because the clear coat fills the 600-grit scratches, you spray straight onto the sanded, cleaned lens. No buffer, no drill, no polishing compound and no 10-step sanding process, which is how a job can take as little as 30 minutes.

Do I have to sand before I spray the clear coat?

Yes. The clear coat needs a clean, evenly sanded surface to bond to. Wet-sand until the whole lens is uniformly milky with no yellow or old coating left, finishing at 600 grit, then dry it completely and wipe it with alcohol. Our how-to guide explains which grit to start with.

What's the difference between complete kits and cans only?

Complete kits are individually boxed and include sanding and prep supplies along with the clear coat. Cans only is just the clear coat, with no sandpaper, prep pads or boxes, for pros who already stock their own supplies.

Will clear coat fix every headlight?

It fixes yellowing, haze and oxidation on the outside of the lens. Deep microcracking can go further into the lens than sanding can safely reach, so inspect the headlight before you start. Damage inside the housing, like moisture or a failed reflector, isn't something a restoration can fix.

Collection